不行的，需要停机

关闭这个分区，把PROFILE中的boot mode修改下，再激活profile。因为修改了profile后保存当前设置为默认怕保存不了，所以先关闭分区

LED 20ee00b may indicate a problem with a corrupted bootimage, bootlist, or NVRAM. It may also be due to a hardware problem with the boot disk in rootvg.This document applies to AIX V4 and V5.Recovery procedure1. Boot your system into a limited funct...

检查风扇Priority: H FRU: 39J0859  S/N: n/a          CCIN: 27B5     Location: U789D.001.DQD75W8-A1和 ...flm20080704 发表于 2013-3-16 22:02     1个风扇和4组内存，更换就是了。...

run "db2mtrk -i -d" to see how much memory being used by DB2

Status informationThe 3592-C07 does not boot all the way. You might need to replace the Memory Riser card or memory DIMM pair.Go to FSPSP01.

顶一个，也遇到类似的情况。暂时没法停双机检查串口通信，查看smitty hacmp ->problem tools-> View Current State显示资源组和网络正常，串口  Network Name: net_rs232_01       State: DOWN。当前tty0波特率19200，异步卡5723显示可用。LABEL:...

重新登录即可

呵呵。这个也有可能是微码问题的。这个还得进入ASMI里面查看下，还有HMC的日志上查看。